Schedule 40S Pipe 3/8 Inch (DN10) is a stainless steel pipe size commonly used in industrial piping systems that require corrosion resistance, dependable wall thickness, and reliable flow capacity. This pipe size is often used in process plants, utility systems, water treatment projects, and stainless steel fabrication work.
This dimension data is based on ANSI/ASME B36.19, which is the standard commonly used for stainless steel pipe dimensions.
3/8 Inch Schedule 40S Pipe Dimensions
- Pipe Schedule: 40S
- Nominal Pipe Size: 3/8 Inch
- DN Size: DN10
- Outside Diameter (OD): 17.1 mm
- Inside Diameter (ID): 12.48 mm
- Wall Thickness: 2.31 mm
- Pipe Weight: 0.84 kg/m
- Pipe Weight Including Water: 0.96 kg/m
- Standard: ANSI/ASME B36.19
Schedule 40S Pipe 3/8 Inch Dimension Table
| Pipe Schedule | NPS (Inch) | DN (mm) | OD (mm) | ID (mm) | Wall Thickness (mm) | Weight (kg/m) |
|---|---|---|---|---|---|---|
| 40S | 3/8 | 10 | 17.1 | 12.48 | 2.31 | 0.84 |
What Is 3/8 Inch Schedule 40S Pipe?
A 3/8 inch Schedule 40S pipe is a stainless steel pipe with a nominal size of 3/8 inch and a wall thickness defined by the 40S schedule. For this size, the outside diameter is fixed at 17.1 mm, while the inside diameter is 12.48 mm based on a wall thickness of 2.31 mm.
The letter S in 40S is commonly used for stainless steel pipe dimensions under ASME B36.19. This designation is widely used by engineers, fabricators, and procurement teams when selecting stainless steel piping for industrial service.
Where Is Schedule 40S Pipe 3/8 Inch Used?
This pipe size is commonly used in systems that need both corrosion resistance and compact stainless steel piping dimensions. Typical applications include:
- Instrumentation and utility piping
- Small process piping lines
- Water and chemical service lines
- Food and beverage piping systems
- Stainless steel branch and service lines
Why Pipe Dimensions Matter
Accurate 3/8 inch Schedule 40S pipe dimensions are important for piping layout, fabrication, support selection, connection planning, and material takeoff. Engineers and designers often check OD, ID, wall thickness, and weight before selecting fittings, supports, and installation methods.
The outside diameter is important for matching clamps, fittings, and pipe supports. The inside diameter helps estimate flow area and system capacity. The wall thickness is important for specification compliance and mechanical strength, while the pipe weight per meter is useful for handling and small support calculations.
3/8 Inch Schedule 40S Pipe Weight Information
The nominal weight of this pipe size is 0.84 kg/m. When filled with water, the combined weight becomes approximately 0.96 kg/m. This information is useful for support planning, fabrication work, and installation preparation.
Difference Between NPS 3/8 and DN10
NPS 3/8 is the inch-based nominal pipe size, while DN10 is the metric designation used in international drawings and specifications. Both terms refer to the same nominal pipe size, and users may search by either inch or DN format depending on project standards.
Common Search Terms for This Pipe Size
Users may also search for this pipe using related keywords such as 3/8 inch Schedule 40S pipe dimensions, DN10 Schedule 40S pipe dimensions, 3/8 inch stainless steel pipe weight, DN10 pipe dimensions, or DN10 sch 40s pipe dimensions.
Conclusion
Schedule 40S Pipe 3/8 Inch (DN10) has an outside diameter of 17.1 mm, an inside diameter of 12.48 mm, a wall thickness of 2.31 mm, and a weight of 0.84 kg/m. It is a useful stainless steel pipe reference size for design, drafting, fabrication, and procurement work.
This page provides a quick reference for engineers, drafters, fabricators, and buyers who need reliable 3/8 inch Schedule 40S pipe dimensions and DN10 pipe dimensions in one place.