Schedule 40S Pipe 24 Inch (DN600 mm) is a stainless steel pipe size commonly used in large industrial piping systems where corrosion resistance, dimensional consistency, and reliable flow capacity are required. This pipe size is widely referenced in process plants, water systems, chemical facilities, food-grade piping, and stainless steel fabrication projects.
This dimension data is based on ANSI/ASME B36.19, which is the common reference standard for stainless steel pipe dimensions.
24 Inch Schedule 40S Pipe Dimensions
- Pipe Schedule: 40S
- Nominal Pipe Size: 24 Inch
- DN Size: DN600 mm
- Outside Diameter (OD): 610 mm
- Inside Diameter (ID): 590.94 mm
- Wall Thickness: 9.53 mm
- Pipe Weight: 141.12 kg/m
- Pipe Weight Including Water: 415.24 kg/m
- Standard: ANSI/ASME B36.19
Schedule 40S Pipe 24 Inch Dimension Table
| Pipe Schedule | NPS (Inch) | DN (mm) | OD (mm) | ID (mm) | Wall Thickness (mm) | Weight (kg/m) |
|---|---|---|---|---|---|---|
| 40S | 24 | 600 | 610 | 590.94 | 9.53 | 141.12 |
What Is 24 Inch Schedule 40S Pipe?
A 24 inch Schedule 40S pipe is a large stainless steel pipe with a nominal size of 24 inches and a wall thickness defined by the 40S schedule. In this size, the outside diameter is fixed at 610 mm, while the inside diameter depends on the wall thickness. For Schedule 40S, the pipe has an inside diameter of 590.94 mm.
The āSā in 40S is commonly associated with stainless steel pipe dimensions under ASME B36.19. This makes Schedule 40S pipe a common reference in stainless piping design, fabrication, and procurement work.
Where Is Schedule 40S Pipe 24 Inch Used?
This pipe size is often used in systems that require a large flow area together with stainless steel material properties. Typical applications include:
- Process piping in chemical and petrochemical plants
- Water treatment and utility piping
- Food, beverage, and pharmaceutical facilities
- Large stainless steel header lines
- Marine and corrosive environment piping systems
Why Pipe Dimensions Matter
Knowing the correct 24 inch Schedule 40S pipe dimensions is important for piping design, support spacing, weight estimation, fabrication, and flange or fitting selection. Engineers, drafters, and buyers often check OD, ID, thickness, and unit weight before preparing layout drawings, MTOs, and installation plans.
For example, the outside diameter is used when matching flanges, clamps, supports, and pipe accessories, while the inside diameter helps estimate internal flow area and system capacity. The pipe weight per meter is also useful for transportation, handling, and support load calculations.
24 Inch Schedule 40S Pipe Weight Information
The nominal weight of this pipe size is 141.12 kg/m. When filled with water, the total weight becomes approximately 415.24 kg/m. This information is useful for structural coordination, pipe rack loading, lifting plans, and support design in industrial projects.
Difference Between NPS 24 and DN600
NPS 24 is the inch-based nominal pipe size, while DN600 is the metric nominal diameter designation. These terms are commonly used together to identify the same pipe size in international projects. In practical piping work, users may search by inch size, DN size, or pipe schedule depending on project standards and drawing conventions.
Common Search Terms for This Pipe Size
Users may also look for this size using related terms such as 24 inch Schedule 40S pipe dimensions, DN600 Schedule 40S pipe dimensions, 24 inch stainless steel pipe thickness, or DN600 pipe weight per meter. Adding these useful references helps readers quickly confirm that they are reviewing the correct pipe data.
Conclusion
Schedule 40S Pipe 24 Inch (DN600 mm) has an outside diameter of 610 mm, an inside diameter of 590.94 mm, a wall thickness of 9.53 mm, and a weight of 141.12 kg/m. This large stainless steel pipe size is widely used in industrial piping systems where accurate dimensions and dependable material specifications are essential.
If you are checking pipe data for design, drafting, fabrication, or procurement, this quick reference can help confirm the correct dimensions for 24 inch Schedule 40S pipe and DN600 pipe dimensions.