This reference covers the dimensional and weight data for 5 inch Schedule 5 pipe, also identified as DN125. Use it when checking pipe layouts, material takeoffs, fabrication drawings, support coordination, or procurement information.
The page separates the nominal pipe designation from the physical dimensions that affect coordination. It also includes a downloadable DWG resource for drafting workflows. For related guidance, compare this page with references covering pipe schedules, NPS and DN designations, pipe fittings, and flange dimensions.
Schedule 5 Pipe 5 Inch (DN125) is a steel pipe size commonly used in industrial piping systems that require good flow capacity with a relatively light wall thickness. This pipe size is often used in utility piping, water systems, low-pressure industrial service, and general steel pipe fabrication work.
This dimension data is based on ANSI/ASME B36.10, which is the standard commonly used for carbon steel pipe dimensions.
5 Inch Schedule 5 Pipe Dimensions
- Pipe Schedule: 5
- Nominal Pipe Size: 5 Inch
- DN Size: DN125
- Outside Diameter (OD): 141.3 mm
- Inside Diameter (ID): 135.76 mm
- Wall Thickness: 2.77 mm
- Pipe Weight: 9.46 kg/m
- Pipe Weight Including Water: 23.92 kg/m
- Standard: ANSI/ASME B36.10
Schedule 5 Pipe 5 Inch Dimension Table
| Pipe Schedule | NPS (Inch) | DN (mm) | OD (mm) | ID (mm) | Wall Thickness (mm) | Weight (kg/m) |
|---|---|---|---|---|---|---|
| 5 | 5 | 125 | 141.3 | 135.76 | 2.77 | 9.46 |
What Is 5 Inch Schedule 5 Pipe?
A 5 inch Schedule 5 pipe is a steel pipe with a nominal size of 5 inches and a relatively thin wall thickness compared with heavier schedules. For this size, the outside diameter is fixed at 141.3 mm, while the inside diameter is 135.76 mm based on a wall thickness of 2.77 mm.
Schedule 5 pipe is often selected when a project needs good flow capacity, reduced pipe weight, and easier handling compared with thicker wall pipes. It is commonly referenced in steel piping design, drafting, fabrication, and material takeoff work.
Where Is Schedule 5 Pipe 5 Inch Used?
This pipe size is commonly used in applications that need good flow capacity with relatively light wall thickness. Typical uses include:
- Water transfer and distribution systems
- Utility and low-pressure industrial piping
- Process and service lines
- Pipe spool fabrication and layout work
- General steel piping projects
Why Pipe Dimensions Matter
Accurate 5 inch Schedule 5 pipe dimensions are important for piping layout, fabrication, transport planning, support design, and installation work. Engineers and designers often check OD, ID, wall thickness, and weight before selecting supports, fittings, welding details, and handling methods.
The outside diameter is important for matching supports, clamps, and pipe accessories. The inside diameter helps estimate internal flow area and system capacity. The wall thickness affects mechanical strength and specification compliance, while the pipe weight per meter is useful for lifting plans, transport, and structural loading calculations.
5 Inch Schedule 5 Pipe Weight Information
The nominal weight of this pipe size is 9.46 kg/m. When filled with water, the combined weight becomes approximately 23.92 kg/m. This information is useful for pipe support design, structural coordination, and lifting preparation in piping systems.
Difference Between NPS 5 and DN125
NPS 5 is the inch-based nominal pipe size, while DN125 is the metric designation used in international drawings and specifications. Both terms refer to the same nominal pipe size, and users may search by either inch size or DN format depending on project standards.
Common Search Terms for This Pipe Size
Users may also search for this pipe using related keywords such as 5 inch Schedule 5 pipe dimensions, DN125 Schedule 5 pipe dimensions, 5 inch pipe weight per meter, DN125 pipe dimensions, or DN125 sch 5 pipe dimensions.
Conclusion
Schedule 5 Pipe 5 Inch (DN125) has an outside diameter of 141.3 mm, an inside diameter of 135.76 mm, a wall thickness of 2.77 mm, and a weight of 9.46 kg/m. It is a useful steel pipe reference size for design, drafting, fabrication, and procurement work.
This page provides a quick reference for engineers, drafters, fabricators, and buyers who need reliable 5 inch Schedule 5 pipe dimensions and DN125 pipe dimensions in one place.
How to Use This 5 Inch Schedule 5 Pipe Reference
Start with the outside diameter when coordinating supports, clamps, sleeves, fittings, and other components that locate around the pipe. Use the inside diameter when preparing flow-area estimates or checking the connection between the pipe and an associated piping component.
The wall thickness and pipe weight are useful for fabrication planning, support coordination, handling, transport, and structural-interface reviews. These values should be considered alongside the project specification, material requirements, joining method, corrosion allowance, and applicable design checks before procurement or construction.
Drafting and CAD Workflow
The downloadable DWG can help drafters begin a layout using the listed pipe size. Confirm the drawing units, layer conventions, connection details, and project-specific tolerances before incorporating the file into a final drawing set. Related internal references for pipe spool drawings, CAD blocks, pipe supports, and steel pipe fittings can extend the design workflow.
Frequently Asked Questions
What is the nominal size of Schedule 5 pipe covered here?
This page covers NPS 5, which is also identified as DN125.
What standard is used for this pipe dimension reference?
The listed dimensions are based on ANSI/ASME B36.10, the standard identified in the source data for carbon steel pipe dimensions.
What are the listed dimensions for 5 inch Schedule 5 pipe?
The listed outside diameter is 141.3 mm, the inside diameter is 135.76 mm, and the wall thickness is 2.77 mm.
What is the listed weight of this pipe?
The listed pipe weight is 9.46 kg/m. The listed combined pipe-and-water weight is 23.92 kg/m.
Is the DWG file available for this pipe size?
Yes. A DWG download for Schedule 5 Pipe 5 Inch DN125 is provided with the reference content. Check the file units and project drafting requirements before use.