Schedule 5S Pipe 24 Inch (DN600 mm) is a stainless steel pipe size used in large-diameter piping systems where corrosion resistance and lighter wall thickness are required. This pipe size is commonly referenced under ANSI/ASME B36.19, the standard used for stainless steel pipe dimensions.
For this size, the pipe has an outside diameter (OD) of 610 mm, an inside diameter (ID) of 598.92 mm, and a wall thickness of 5.54 mm. The listed pipe weight is 82.58 kg/m, while the weight including water is 364.16 kg/m.
Schedule 5S Pipe 24 Inch (DN600 mm) Dimension Table
| Pipe Size | NPS | DN | Outside Diameter (OD) | Inside Diameter (ID) | Wall Thickness | Weight |
|---|---|---|---|---|---|---|
| Schedule 5S Pipe | 24 Inch | DN600 | 610 mm | 598.92 mm | 5.54 mm | 82.58 kg/m |
What Is Schedule 5S Pipe?
Schedule 5S is a thin-wall stainless steel pipe schedule listed in ASME B36.19. The āSā designation is generally used for stainless steel pipe schedules. Compared with heavier pipe schedules, Schedule 5S offers lower wall thickness and lighter weight, which can be helpful for fabrication, transport, and installation in suitable service conditions.
Pipe schedule selection should always be checked against project requirements such as design pressure, temperature, corrosion allowance, piping code, and service environment.
24 Inch Schedule 5S Pipe Data
- Standard: ANSI/ASME B36.19
- Pipe Type: Stainless Steel Pipe
- NPS: 24 Inch
- DN: DN600
- OD: 610 mm
- ID: 598.92 mm
- Wall Thickness: 5.54 mm
- Pipe Weight: 82.58 kg/m
- Weight Including Water: 364.16 kg/m
Common Uses of 24 Inch Schedule 5S Pipe
24 inch Schedule 5S stainless steel pipe may be used in applications where a large flow path and corrosion-resistant material are needed. Typical uses may include:
- Water treatment and utility systems
- Industrial stainless steel process piping
- Low-pressure transfer lines
- Food and beverage production systems
- Chemical plants and general fabrication work
Why DN600 Pipe Dimensions Matter
Many users search for DN600 pipe dimensions to verify layout space, support design, transportation limits, fabrication details, and compatibility with related piping components. For large-diameter pipe, accurate dimensions are important for spool coordination, structural loading, and installation planning.
Knowing the correct 24 inch Schedule 5S pipe dimensions also helps engineers, detailers, estimators, and buyers compare this pipe with other schedules when reviewing wall thickness, internal flow area, and total pipe weight.
NPS 24 and DN600 Explained
NPS stands for Nominal Pipe Size in inches, while DN stands for Diameter Nominal in millimeters. For this pipe size:
- NPS 24 = inch-based nominal pipe size
- DN600 = metric nominal designation
Even though DN is shown in metric form, the actual outside diameter must still be checked from the pipe standard. For this size, the OD is 610 mm.
Reference for Schedule 5S Pipe 24 Inch
This page provides a quick dimensional reference for engineers, designers, students, fabricators, and procurement teams looking for Schedule 5S Pipe 24 Inch (DN600 mm) data in a simple format.
Reference Standard: ANSI/ASME B36.19 stainless steel pipe dimensions.