Schedule XS Pipe 14 Inch (DN350) is a steel pipe size commonly used in industrial piping systems, utility lines, water transmission projects, plant construction, and fabrication work. This page provides a practical reference for the main dimensions and weight of 14 inch XS pipe based on ANSI/ASME B36.10.
For piping engineers, CAD designers, estimators, fabrication teams, and site supervisors, accurate pipe size data is important for layout work, material takeoff, support design, transport planning, and installation checks. This guide presents the essential dimensions in a cleaner format that adds more value than a simple size table.
14 Inch Schedule XS Pipe Dimensions
- Pipe Size: 14 Inch
- Nominal Diameter: DN350
- Pipe Schedule: XS (Extra Strong)
- Outside Diameter (OD): 355.6 mm
- Inside Diameter (ID): 330.2 mm
- Wall Thickness: 12.7 mm
- Pipe Weight: 107.4 kg/m
- Pipe Weight Including Water: 192.99 kg/m
- Reference Standard: ANSI/ASME B36.10
Schedule XS Pipe 14 Inch Table
| NPS | DN | OD (mm) | ID (mm) | Wall Thickness (mm) | Weight (kg/m) |
|---|---|---|---|---|---|
| 14″ | 350 | 355.6 | 330.2 | 12.7 | 107.4 |
What Does Schedule XS Mean?
Schedule XS stands for Extra Strong. It is a pipe wall designation used in steel pipe standards. The selected schedule affects the wall thickness, which directly affects the inside diameter, pipe weight, fabrication requirements, and support loading.
For a size such as 14 inch DN350 pipe, wall thickness remains important because it affects total pipe weight, handling requirements, support loads, and installation planning in real projects.
Why 14 Inch DN350 Pipe Dimensions Matter
Knowing the exact dimensions of 14 inch Schedule XS pipe is useful for several engineering and construction tasks:
- Fabrication: OD and wall thickness are needed for cutting, beveling, welding, and fit-up work.
- Support Design: Pipe weight per meter helps engineers check support spacing and structural loads.
- Flow Review: ID is useful for estimating internal flow area and hydraulic performance.
- Transport and Lifting: Accurate weight data supports safer handling and planning.
- Schedule Comparison: Engineers often compare XS with STD, Sch 40, Sch 60, or Sch 80 during design review.
Typical Applications of 14 Inch Schedule XS Pipe
This pipe size may be used in:
- Industrial process piping
- Water transmission systems
- Power and utility projects
- Plant piping works
- Infrastructure construction
- Custom steel fabrication and spool projects
Engineering Notes
NPS means Nominal Pipe Size, while DN means Diameter Nominal. Although this pipe is called 14 inch, the actual outside diameter is 355.6 mm according to the standard. The inside diameter changes with the pipe schedule because wall thickness changes from one schedule to another.
That means if you compare the same 14 inch pipe in a different schedule, the OD usually stays the same, while the ID, wall thickness, and pipe weight will change.
Reference
The dimension data on this page is based on ANSI/ASME B36.10, which is widely used for steel pipe dimensions in industrial applications.