Schedule 40 pipe 18 inch (DN450) is a standard steel pipe size commonly used in piping design, fabrication, drafting, and engineering estimation work. This page provides the standard dimensions and weight data for NPS 18 Schedule 40 pipe based on ANSI / ASME B36.10, including outside diameter, inside diameter, wall thickness, and weight per meter.
This size is widely used in industrial piping systems, utility services, water lines, and fabrication projects where accurate dimensional data is important for layout, support design, material takeoff, and installation planning.
18 Inch Schedule 40 Pipe Dimensions
- Nominal Pipe Size (NPS): 18 inch
- Diameter Nominal (DN): DN450
- Pipe Schedule: Schedule 40
- Outside Diameter (OD): 457 mm
- Wall Thickness: 14.27 mm
- Inside Diameter (ID): 428.46 mm
- Pipe Weight: 155.81 kg/m
- Pipe Weight Including Water: 299.91 kg/m
- Reference Standard: ANSI / ASME B36.10
Schedule 40 Pipe 18 Inch (DN450) Data Table
| NPS | DN | OD (mm) | Wall Thickness (mm) | ID (mm) | Weight (kg/m) |
|---|---|---|---|---|---|
| 18 inch | DN450 | 457 | 14.27 | 428.46 | 155.81 |
What Is 18 Inch Schedule 40 Pipe Used For?
18 inch Schedule 40 pipe is commonly used in medium to large industrial and utility piping systems where a standardized steel pipe size is required. Engineers, designers, and fabricators often use this size in:
- Water transmission and distribution systems
- Cooling water piping
- Industrial utility lines
- Process piping systems
- Plant layout and pipe routing work
- Fabrication and spool drawing preparation
Because this is a substantial pipe size, accurate dimensions and weight data are important for support design, transport planning, lifting studies, and material estimation.
Why These Dimensions Matter in Engineering
In piping and mechanical design, standard pipe dimensions are important for more than simple identification. The outside diameter is used for supports, clamps, insulation sizing, and equipment connection layouts. The inside diameter affects internal flow area and hydraulic calculations. The wall thickness is important for fabrication, welding preparation, and pipe strength, while the pipe weight per meter is essential for support load calculations and installation planning.
Using the correct DN450 Schedule 40 pipe dimensions helps reduce drafting errors, procurement mistakes, and field fit-up problems during construction and fabrication work.
18 Inch DN450 Schedule 40 Pipe for CAD and Drafting Work
For CAD, BIM, and piping drafting work, this size is commonly listed as NPS 18 or DN450. The standard OD of 457 mm is especially useful for routing clearance, support detailing, and nozzle or equipment connection references in both 2D drawings and 3D models.
This page can be used as a quick reference for 18 inch Schedule 40 pipe dimensions, DN450 pipe dimensions, and Schedule 40 steel pipe weight per meter during design, drafting, and estimation work.
Frequently Asked Questions
What is the outside diameter of 18 inch Schedule 40 pipe?
The outside diameter of 18 inch Schedule 40 pipe is 457 mm.
What is the wall thickness of DN450 Schedule 40 pipe?
The wall thickness is 14.27 mm.
What is the inside diameter of Schedule 40 pipe 18 inch?
The inside diameter is 428.46 mm.
How much does 18 inch Schedule 40 pipe weigh?
The pipe weight is 155.81 kg/m. The weight including water is 299.91 kg/m.
Which standard covers these dimensions?
These dimensions are based on ANSI / ASME B36.10.
Conclusion
Schedule 40 pipe 18 inch (DN450) is an important reference size for industrial piping, drafting, fabrication, and engineering calculations. With an OD of 457 mm, ID of 428.46 mm, wall thickness of 14.27 mm, and weight of 155.81 kg/m, it is a useful standard pipe size for engineers, designers, and estimators working with steel piping systems.
For more pipe schedule data, compare this size with nearby standard sizes such as 16 inch and 20 inch Schedule 40 pipe pages.