Schedule 10 pipe 1/4 inch (DN8) is a small-size steel pipe commonly used in piping design, fabrication, drafting, and estimation work. This page provides the standard dimensions, wall thickness, inside diameter, and weight per meter for NPS 1/4 Schedule 10 pipe based on ASME B36.10.
1/4 Inch Schedule 10 Pipe Dimensions
- Nominal Pipe Size (NPS): 1/4 inch
- Diameter Nominal (DN): DN8
- Outside Diameter (OD): 13.7 mm
- Wall Thickness: 1.65 mm
- Inside Diameter (ID): 10.4 mm
- Pipe Weight: 0.49 kg/m
- Pipe Weight Filled With Water: 0.57 kg/m
- Reference Standard: ASME B36.10
Schedule 10 Pipe 1/4 Inch Data Table
| Pipe Size | DN | OD (mm) | Wall Thickness (mm) | ID (mm) | Weight (kg/m) |
|---|---|---|---|---|---|
| 1/4 inch | 8 | 13.7 | 1.65 | 10.4 | 0.49 |
What Does Schedule 10 Mean?
Schedule 10 refers to the wall thickness series of the pipe. For the same nominal pipe size, the outside diameter remains fixed while the wall thickness changes depending on the schedule. A thicker wall generally increases pipe weight and reduces the inside diameter.
Typical Uses of 1/4 Inch Schedule 10 Pipe
NPS 1/4 Schedule 10 pipe is commonly used in utility systems, instrument-related small-bore piping, low-pressure service lines, drainage applications, and general fabrication work where a lighter wall thickness is suitable. It is also a practical reference size for material takeoff, support planning, and piping layout.
Why Pipe Weight Matters
Pipe weight per meter is important for transport planning, support design, structural loading, fabrication estimates, and lifting calculations. Even in small piping systems, installed weight can affect support spacing, handling methods, and total material cost.
1/4 Inch Schedule 10 Pipe Calculation Notes
The listed weight is based on standard steel pipe dimension data using the outside diameter and wall thickness of the pipe. Actual product weight may vary slightly depending on manufacturing tolerance, material grade, and supplier standard.
Frequently Asked Questions
What is the outside diameter of 1/4 inch Schedule 10 pipe?
The outside diameter is 13.7 mm.
What is the wall thickness of DN8 Schedule 10 pipe?
The wall thickness is 1.65 mm.
What is the inside diameter of NPS 1/4 Schedule 10 pipe?
The inside diameter is 10.4 mm.
How much does 1/4 inch Schedule 10 pipe weigh?
The approximate weight is 0.49 kg/m.
Which standard covers this pipe size?
This dimension data is based on ASME B36.10 for welded and seamless wrought steel pipe.
Conclusion
Schedule 10 pipe 1/4 inch (DN8) has an outside diameter of 13.7 mm, wall thickness of 1.65 mm, inside diameter of 10.4 mm, and a weight of 0.49 kg/m. It is a useful reference for piping design, drafting, estimating, and fabrication work.