Schedule 100 pipe 14 inch (DN350) is a heavy-wall steel pipe size commonly used in piping design, fabrication, drafting, and engineering estimation work. This page provides the standard dimensions, wall thickness, inside diameter, and weight per meter for NPS 14 Schedule 100 pipe based on ASME B36.10.
14 Inch Schedule 100 Pipe Dimensions
- Nominal Pipe Size (NPS): 14 inch
- Diameter Nominal (DN): DN350
- Outside Diameter (OD): 355.6 mm
- Wall Thickness: 23.83 mm
- Inside Diameter (ID): 307.94 mm
- Pipe Weight: 194.98 kg/m
- Pipe Weight Filled With Water: 269.41 kg/m
- Reference Standard: ASME B36.10
Schedule 100 Pipe 14 Inch Data Table
| Pipe Size | DN | OD (mm) | Wall Thickness (mm) | ID (mm) | Weight (kg/m) |
|---|---|---|---|---|---|
| 14 inch | 350 | 355.6 | 23.83 | 307.94 | 194.98 |
What Does Schedule 100 Mean?
Schedule 100 refers to a heavier wall thickness series than lighter schedules such as Schedule 10 or Schedule 40. For the same nominal pipe size, the outside diameter remains fixed while the wall thickness increases according to the schedule. A thicker wall reduces the inside diameter and significantly increases pipe weight.
Typical Uses of 14 Inch Schedule 100 Pipe
NPS 14 Schedule 100 pipe is commonly referenced for heavy-duty industrial piping systems where higher wall thickness is required. It may be used in process piping, plant utility systems, fabrication work, structural loading checks, and engineering applications where pipe strength and wall thickness are more critical than maximum flow area.
Why Pipe Weight Matters
Pipe weight per meter is essential for transport planning, lifting studies, support design, structural loading, fabrication estimates, and installation planning. For a 14 inch Schedule 100 pipe, the heavy wall thickness creates a much higher installed weight than lighter schedules, so accurate weight data is important for engineering and construction work.
14 Inch Schedule 100 Pipe Calculation Notes
The listed weight is based on standard steel pipe dimensions using the outside diameter and wall thickness of the pipe. Actual product weight may vary slightly depending on manufacturing tolerance, material specification, and supplier standard.
Frequently Asked Questions
What is the outside diameter of 14 inch Schedule 100 pipe?
The outside diameter is 355.6 mm.
What is the wall thickness of DN350 Schedule 100 pipe?
The wall thickness is 23.83 mm.
What is the inside diameter of NPS 14 Schedule 100 pipe?
The inside diameter is 307.94 mm.
How much does 14 inch Schedule 100 pipe weigh?
The approximate weight is 194.98 kg/m.
Which standard covers this pipe size?
This dimension data is based on ASME B36.10 for welded and seamless wrought steel pipe.
Conclusion
Schedule 100 pipe 14 inch (DN350) has an outside diameter of 355.6 mm, wall thickness of 23.83 mm, inside diameter of 307.94 mm, and a weight of 194.98 kg/m. It is a useful reference for piping design, fabrication, estimating, and heavy-duty industrial engineering work.