Pipe Standards Made Simple

Tag: piping fabrication

  • Pipe End Types in CAD: Plain, Beveled, Threaded, and Grooved Ends Explained

    Pipe End Types in CAD: Plain, Beveled, Threaded, and Grooved Ends Explained

  • Flange Alignment in Piping CAD: Offset, Angular Error, Bolt-Hole Rotation, and Fit-Up

    Flange Alignment in Piping CAD: Offset, Angular Error, Bolt-Hole Rotation, and Fit-Up

  • Threaded Pipe Joints in CAD: Engagement, Makeup, and Cut-Length Control

    Threaded Pipe Joints in CAD: Engagement, Makeup, and Cut-Length Control

  • Weld Shrinkage in Piping Fabrication: Why CAD Cut Lengths Need Shop Control

    Weld Shrinkage in Piping Fabrication: Why CAD Cut Lengths Need Shop Control

  • Socket-Weld Connections in Piping CAD: Socket Depth, Assembly Gap, and Pipe Cut Length

    Socket-Weld Connections in Piping CAD: Socket Depth, Assembly Gap, and Pipe Cut Length

  • Cold Spring in Piping: Installed Offsets, Fabrication Dimensions, and CAD Control

    Cold Spring in Piping: Installed Offsets, Fabrication Dimensions, and CAD Control

  • Pipe Bends vs. Elbows in CAD: Geometry, Fabrication, and Documentation

    Pipe Bends vs. Elbows in CAD: Geometry, Fabrication, and Documentation

  • Pipe Fitting Takeoff in CAD: From Centerline Dimensions to Pipe Cut Length

    Pipe Fitting Takeoff in CAD: From Centerline Dimensions to Pipe Cut Length

  • Piping BOM vs. MTO vs. Cut List: What Each Deliverable Controls

    Piping BOM vs. MTO vs. Cut List: What Each Deliverable Controls